COUNTERWEIGHT CHEESE PRESS
Description
Cheese press made of steel stainless steel. It uses the lever principle with counterweights. Available in three sizes: for 2, 3 or 4 push points (each push point works on up to 4 stacks of cheese).
The machine is adjustable to work on 2 to 4 cheese levels.
Each push point develops a push of up to about 100 kg
Options:
PFC-xxx/1: Intermediate plastic plate (PE) with dimensions 250 x 450 x 20 mm
PFC-xxx /2: Lower shelf in grating stainless steel
Note: 2 plates should be provided between each two layers of cheese.
Technical Data:
|
Model |
N. columns |
N. Forme* |
Dimensions (mm) |
Work area (mm) |
N. pianetti Recommended |
|
PFC-002 |
2 |
16-32 |
1100 x 600 x h1900 |
950×600 |
12 |
|
PFC-003 |
3 |
24-48 |
1600 x 600 x h1900 |
1450×600 |
18 |
|
PFC-004 |
4 |
32-64 |
2100 x 600 x h1900 |
1950×600 |
24 |
* for cheese molds with a maximum diameter of 24 cm
On request and upon providing the dimensions of the molds, custom presses can be manufactured.
The company reserves the right to change technical data and specifications without prior notice.