Description
Pump section entirely made of AISI 316 stainless steel. The electric motor is painted with anti acid paint.
The special mechanical seal endorsed in these pumps gives maximum assurance of no leakage up to over 90 °C.
All pumps comes with a stainless steel trolley.
The small model comes with 1-1/4″ ports and two nylon connections for 30 mm hoses, while the two bigger models comes with standard DIN 11851 ports (hose connections excluded).
(uppon request the pumps can be supplied with any type of ports)
Single-phase 230 V/50 Hz:
| Model | Power (Hp/KW) |
rpm | Mouths | Flow capacity @ 0 mt. (Lt/Min) |
Flow capacity @ 5 mt. (Lt/Min) |
| EPM-050 | 0.6/0.45 | 2800 | 1 ¼” / DIN 32 | 58 | 47 |
| EPM-120 | 1.5/1.1 | 1400 | 1 ½” / DIN 40 / DIN 50 | 120 | 105 |
| EPM-230 | 2/1.5 | 1400 | 2” / DIN 50 | 230 | 210 |
Three-phase 400 V/50 Hz:
| Model | Power (Hp/KW) |
rpm | Mouths | Flow capacity @ 0 mt. (Lt/Min) |
Flow capacity @ 5 mt. |
| EPT-050 | 0.7/0.55 | 2800 | 1 ¼” / DIN 32 | 58 | 47 |
| EPT-120 | 1.5/1.1 | 1400 | 1 ½” / DIN 40 – 50 | 120 | 105 |
| EPT-230 | 2/1.5 | 1400 | 1 ½” / DIN 50 | 230 | 210 |
| EPT-350 | 5,3/4 | 1400 | 2” / DIN 50 | 350 | 320 |
The Company reserves the right to modify the technical data and characteristics at any time without notice
