MANUAL packaging machines for trays or cups

Stainless steel thermosealing machine with interchangeable anticorodal aluminium moulds Suitable for packaging trays, tubs and pre-formed cups with compatible sealing film. Container materials can be of various kinds: PP, PET, PS, aluminium and
laminated cardboard.
The cover material is wound on a reel and is placed on a roller behind the sealing plate, the unwinding of this material on the container is done manually.
The sealing plate is flat and therefore does not require
be changed in the event of a format change.
The bottom plate (mould) must fit the container and must therefore be changed every time the format is changed. The format change, however, only takes a few seconds.
Welding takes place by means of heat and pressure exerted manually by the operator on the large front handle.
Film cutting takes place automatically at the same time as sealing (on the sealing side).
The machine is equipped with a temperature controller to adapt the welding temperature to the materials chosen by the customer and with a timer that warns when welding is complete.

Standard moulds:

- CTM-300/1: tray mould
260x190xh65 mm

- CTM-300/2: double mould for
trays 137x95xh65 mm

- CTM-300/2: tray mould
190x137xh72 mm

- CTM-300/C: custom mould for
trays to customer specifications
If the customer wishes to use its own trays, moulds can be made by supplying samples
suitable (10-20 samples are needed).