Pumps for milk in Italy Dairy machines in Italy Mini dairy equipment in Italy Pasteurization plant in Italy Cheese making equipment in Italy Milk coolers in Italy Vats for milk in Italy Molds and hops for cheese and ricotta in Italy Refrigerated cabinets, Cold Rooms in Italy Homogenizers for milk and yoghurt in Italy Polyfood in Italy Equipment for milk farms in Italy Cheese making machine in Italy Cheese kettles in Italy Pasterurizers for milk in Italy Dairy plants in Italy Cheese factory equipment in Italy Cheese vat in Italy

Chilled Water Generators (Ice Banks)

The Ice Bank system is a simple technology based on storing cooling capacity at night and using it the following day to cool. At night when electricity is generated at less cost, chillers cool fluid and store it normally as chilled water or ice. During daytime, when electricity is more expensive, the stored cooling is used to meet the building cooling load requirements.

 

Description

Chilled Water Generators (Ice Banks)

These Ice Banks are preassembled units consisting of:
– Tank with thermostatic expansion valve for the feeding of evaporators.
– Air Condensing Unit including control panel and connections.

Construction:
Inner Tank: galvanised iron-sheet.
Insulation: high density polystyrene with vapour barrier.
Outer Shell: painted galvanised iron-sheet.
Bottom: galvanised iron-sheet.
Upper Frame and Hooks: stainless steel.
Agitation: Air blower.
Evaporators: galvanised carbon-steel mode banks.
Feeding: evaporators equipped with distributors for liquid injection regulation.
Ice Control: for the condensing unit drive.

Advantages:
– In comparison with the systems planned to work without any stored refrigeration, less is the time of use more is the advantage. The relevant advantages are the following:
– Minimum capital cost because of the reduction of plant capacity
– Minimum running cost because of the possibility to avoid the top consumption’s and relevant penalties.
– Maximum safety since icing does not cause any breakage and damage like in the shell and tube chillers.
– Maximum dependability because of the possibility of using the ice until the service arrival.

Technical Characteristics:
Power Supply: 400V 3 phases – 50 Hz

Model

Storage

capacity

(kcal)

Storage

time

(hours)

Supported

storage

(kcal/h)

Tank

capacity

(litres)

Power

(kW)

Length

(mm)

Tank

Height

(mm)

Total

Heght

(mm)

Weight

(kg)

(*)

AG-45.01

39.000

11

3.500

2.150

4

880

1.785

2.235

640

C

AG-60.02

51.600

12

4.300

2.150

5

880

1.785

2.235

680

C

AG-90.04

77.400

11

7.000

2.150

7

880

1.785

2.235

750

C

AG-130.05

112.000

13

8.600

3.800

9

1.060

2.345

2.535

1.130

C

AG-180.06

155.000

14

11.000

3.800

10

1.060

2.345

2.535

1.220

R

AG-220.07

190.000

13

14.600

5.550

12

1.500

2.345

2.535

1.500

R

AG-310.08

266.000

14

19.000

7.350

16

1.940

2.345

2.590

1.850

R

Tank width = 2.300 mm

 

(*): C = With air condensing unit and refrigerating unit compact to the tank (on the width side); R = With remote air condensing unit and refrigerating unit compact to the tank

 


The Company reserves the right to modify the technical data and characteristics at any time without notice

Attachments

ag-45_01-310_08-it-16a.1
pdf | 97.08 KB